Hi,
You're receiving this email because {name} thinks the Wheeler Space Saver Gunsmithing Screwdriver Set would interest you.
Wheeler Space Saver Gunsmithing Screwdriver Set
The Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little bench space while providing a sturdy and comprehensive set of 34 bits designed to meet the majority of your gunsmithing needs. A 2-inch long extension is included with the normal, Phillips, hex, and torx bits, as well as a hex-to-square conversion bit that allows you to use 1/4" square drive sockets and other accessories. The hollow-handled magnetic handle is appropriately sized for gunsmithing needs and allows you to carry a variety of bits if the need arises.
Features:
Only 8-1/2" x 2-3/4" size
Notes:
➼ Driver handle features compartment to hold extra bits
➼ Contains 6 slot bits, 8 Torx bits, 16 allen-head bits, and 4 Phillips head bits.
➼ Packaged in a plastic box
➼ Contents made in China and assembled in the US
Note on bits:
The bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit should not be considered a defect, rather it means that the fastener will require some other means of removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil.
Best Suited For
✔️ Firearm owners & hobbyists
- Ideal for routine maintenance and light gunsmithing
- Suitable for rifles, shotguns, and handguns
✔️ Range and field use
- Compact enough to carry in:
- Useful for on-the-spot adjustments
✔️ Entry-level to intermediate users
- Great “starter” kit before upgrading to larger sets
- Covers most common screw types used on firearms
Community feedback often highlights Wheeler kits as good value and sufficient for most users, especially beginners.
When To Use It
Use this set when:
- 🔧 Tightening or adjusting:
- Scope mounts
- Action screws
- Grip screws
- 🛠️ Performing basic firearm maintenance
- 🎯 Fixing issues at the range (e.g., loose screws)
Its compact size makes it especially useful when a full gunsmithing bench is not available.
Technical Information
Core Specs
- Bit Count: 26 pieces
- Bit Types:
- Flat / standard
- Phillips
- Hex (Allen)
- Torx
- Handle:
- Magnetic tip
- Ergonomic grip
Special Features
- 2" #2 Phillips bit (ideal for recoil pad installation)
- Hex-to-square adapter (accepts 1/4" sockets)
- Hollow handle for bit storage
Physical Dimensions
Design Notes
- Bits are selected to fit common firearm screws
- Compact case allows easy transport and storage
FAQs
1. Is this a full professional gunsmithing kit?
No — it’s a compact “space saver” kit.
For full workshop use, larger kits (43-piece, 89-piece) offer more coverage.
2. Will it fit all firearm screws?
- Covers most common screws
- May not fit:
- Rare or antique firearms
- Highly specialised fasteners
3. Are the bits durable?
- Designed to protect screws — some sets note bits may fail before damaging fasteners, which is intentional
4. Can it replace a full toolkit?
- ✔️ Yes for field/range use
- ❌ No for advanced gunsmithing or full disassembly
5. Why use gunsmith screwdrivers instead of regular ones?
- Properly fitted bits:
- Prevent stripped screws
- Protect firearm finishes
Delivery and Compliance
- This item can be shipped nationwide within New Zealand.
- No firearms licence is required for delivery.
- Delivery times may vary depending on location and courier schedules.
- This product is a reloading accessory and is not classified as a firearm, ammunition, or controlled item.
For more information, please click
Here
Regards,
