View Favourites

This product has been disabled.

This product is no longer active. Perhaps you should search our shop for other similar products.

Specifications

brand: lee
device: bulletcasting

Description

Lee Bullet Size Kit .430" #90062

Lee .430 BULLET SIZING KIT sizes cast bullets, as well as seats and crimps gas checks. Fits any standard 7/8x14 thread reloading press.

Lee Liquid Alox and Reloading Press are required to utilize this kit and are sold separately.

➼ SKU: 90062
➼ Weight: 0.95 lbs
 

Best Suited For

  • Reloaders using:
    • .44 Remington Magnum
    • .44 Special
    • Some .444 Marlin cast loads
  • Shooters working with:
    • Cast lead bullets
    • Powder-coated bullets
  • Firearms with:
    • Slightly larger cylinder throats or groove diameters
  • Those aiming to:
    • Improve accuracy and consistency
    • Reduce gas blow-by and fouling

When To Use It

Use during the bullet preparation stage:

  • After casting bullets to ensure uniform diameter
  • Before loading ammunition
  • When matching bullet size to:
    • Cylinder throat size (revolvers)
    • Barrel groove diameter
  • When troubleshooting:
    • Leading in barrel
    • Poor grouping
    • Inconsistent velocities

Technical Information

  • Product Code: 90062
  • Sizing Diameter: .430 inch
  • System Type: Push-through sizing die
  • Material: Hardened steel
  • Thread Size: 7/8"-14 (fits standard reloading presses)
  • Compatibility: Designed for cast or coated bullets only (not jacketed bullets)

FAQs

Q: Why choose .430" instead of .429"?
Some .44 caliber firearms—especially revolvers—have slightly larger cylinder throats, and .430" bullets provide:

  • Better bore seal
  • Reduced gas blow-by
  • Improved accuracy

Q: Is this safe for all .44 Magnum firearms?
Generally yes, but always confirm your firearm’s throat and bore dimensions to ensure safe and optimal fit.

Q: Can I use this for .44-40?
No. .44-40 typically uses smaller bullets (.427"–.428").

Q: Do I need to lubricate bullets before sizing?
Yes, unless using powder-coated bullets.

Q: Will it fit my press?
Yes, it fits all standard presses with 7/8"-14 threads.

Delivery and Compliance

  • Classified as a non-controlled reloading accessory
  • Generally legal to import and own in New Zealand
  • No firearms licence typically required

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like