Questions? Feedback? powered by Olark live chat software

This product has been disabled.

This product is no longer active. Perhaps you should search our shop for other similar products.

Description

The quickest and most straightforward method for sizing cast bullets. Threads sized 7-8x14" accommodate any single-stage reloading press. No specific nose punches are required because bullets are driven through the sizing die nose first. Gas checks are placed and crimped in place mechanically. Bullets of various sizes are caught in a specific container. Reloading Press and Lee Liquid Alox are available separately.
*Special note: Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram.
Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary.
To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on.
For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like