Questions? Feedback? powered by Olark live chat software

This product has been disabled.

This product is no longer active. Perhaps you should search our shop for other similar products.


Hornady manufactures brass with the same level of precision, attention to detail, and excellence that has made them a world leader in bullets. They inspect each item by hand, measuring it for consistent wall concentricity, testing pressure calibration to ensure uniform case expansion, and measuring it for consistent wall concentricity. This commitment to quality assures appropriate bullet seating in both the case and the chamber, as well as consistent charges and pressures. As a result, your cartridges will have optimal velocity and repeatable accuracy. Brass is brand new and unprimed. This isn't ready-to-fire ammo.
Brass Preparation: It's not uncommon to find a few case mouths that are "out of round" or slightly damaged below the shoulder when buying bulk rifle brass. These flaws appear after the case mouth has been annealed during the final tumbling wash procedure. Although brass producers are aware of the case cosmetics and have sought to alleviate them, denting may still occur due to equipment design. Minor dents are normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  Make sure to lubricate the case neck inside the case mouth to keep it from straining.
Box of 50


In order to assist us in reducing spam, please type the characters you see:

You may also like