Hi,
You're receiving this email because {name} thinks the Warne 7.3/.22 Steel Rings 30mm High #732M would interest you.
Warne 7.3/.22 Steel Rings 30mm High #732M
The WARNE 30mm Matte High WARNE 30mm Matte High WARNE 30mm Matte High WARNE 30 The 22 Rings (732M) are the most durable tiny bore rings on the market. They're made to accommodate a wide range of rifles and work with both 3/8" and 11mm dovetails. This is made possible by using a solid asymmetrical reversible clamp that can be flipped 180 degrees and used on wider or narrower dovetails for the best fit. The 30mm .22 Rings are vastly different in design from Warne Maxima line of mounts. Because of their 70/30 horizontal structure, these rings are lighter and only 1/2" wide. A single T-15 Torx style fastener is used to attach the ring top strap to the dovetail, and two more of the same fasteners are used to secure the entire package.
Features :
- Type: Riflescope Mounting Rings
- Fits: 3/8in and 11mm Dovetails
- Tube Size, mm: 30
- Ring Style: Fixed
- Ring Height, in: High .525"
- Finish: Matte Black
- 7.3/22 Fixed Rings
- Durable and lightweight
- Fits both 3/8" and 11mm dovetail grooved receivers
- Available for a variety of top selling rifle and pistol models
- Asymmetrical Reversible Clamp that can be fliped 180 degrees
- Attaches using a T-15 Torx Screw
- Matte Black Finish
Best Suited For
The Warne 30mm High Rimfire Rings (#732M) are best suited for:
- Rimfire rifles with 3/8" or 11mm dovetail rails
- Shooters using 30mm scope tubes
- Setups requiring higher scope clearance (e.g., larger objective lenses up to ~50–52mm)
- Users wanting durable all-steel rings for long-term reliability
- Precision shooters who value secure, repeatable scope mounting
These are especially popular for rifles like .22 LR, .17 HMR, and similar small-bore platforms.
When To Use It
Use the #732M rings when:
- Your rifle has a dovetail rail (not Picatinny/Weaver)
- You need high rings to clear a large objective scope
- You want a stronger alternative to aluminum rings
- You prefer a fixed, non-quick-detach mounting system
- You need flexibility between 3/8" and 11mm rails
They’re ideal for target shooting, hunting, and rimfire precision setups.
Technical Information
- Model: Warne Rimfire Rings
- Part Number: #732M
- Tube Size: 30mm
- Ring Height: High (~0.525")
- Material: Steel
- Finish: Matte Black
- Weight: ~4.1 oz
- Fitment:
- 3/8" dovetail
- 11mm dovetail
Key Features
- Reversible clamp system – fits both narrow and wide dovetail rails
- 70/30 horizontal split design for improved grip and alignment
- All-steel construction for maximum durability
- Torx (T-15) fasteners for secure mounting
- Designed for objective lenses up to ~52mm
FAQs
Q: Will these fit a Picatinny or Weaver rail?
No. These are designed specifically for 3/8" and 11mm dovetail rails, commonly found on rimfire rifles.
Q: What does “high” mean?
“High” refers to the ring height (~0.525"), allowing clearance for larger scope objectives.
Q: Are they strong enough for heavy use?
Yes. The steel construction and clamp design make them among the strongest rimfire rings available.
Q: Can I install them myself?
Yes. Basic installation steps:
- Place rings on dovetail
- Tighten clamp screws (~25 in/lb recommended)
- Install scope and level reticle
Q: Do they hold zero well?
Yes. The solid clamp and steel build provide excellent return-to-zero stability when properly installed.
Delivery and Compliance
- Classified as non-controlled firearm accessories.
- No firearms licence is required to purchase or own.
- Safe handling and responsible use are always required.
- This item can be shipped nationwide within New Zealand.
- Delivery times may vary depending on location and courier schedules.
For more information, please click
Here
Regards,
