- Track your orders
- Save your details for express checkout
Since 1979
RELOADERS SUPPLIES
Your online firearms specialist
Your online firearms specialist
Delivery nationwide for just $12 (online orders only)
Freight on phone orders to be confirmed"
Mon-Fri 8:30-4:30pm
Saturday 9-12 Noon
brand: | forster |
equipment: | neck turner |
Forster Outside Neck Turner Part OT1010
For Use with the Original Case Trimmer and Power Case Trimmer.
Outside Neck Turner Accessory Instructions. The Outside Neck Turner Accessory is used with the Original Case Trimmer. The Forster Outside Neck Turner is an invaluable aid in maintaining a uniform thickness in the neck walls of your cartridge cases.
Unlike hand held neck turners which are centered only on the pilot, the Forster Outside Neck Turner turns your case neck concentric to its true axis. It produces neck walls of uniform thickness and exact outside neck diameter. Properly adjusted, it will turn necks to within a tolerance of .0001". The cutter head of the Outside Neck Turner has an adjustable circular carbide cutter for a lifetime of reliable use. In operation, the wall of the neck passes progressively between the pilot and the cutter, as the neck wall of the case is reduced to a uniform thickness. You control the rate of feed by rotating the feeder cam while a mechanical stop controls the length of the cut. The short pilot used in case trimming is replaced with a longer, hardened and ground pilot of the desired caliber. To change calibers (any diameter from .204 to .375) simply insert the correct pilot and make the necessary adjustments.
NOTE: The Forster Outside Neck Turner is designed to be used after the neck has been resized and expanded. Cases longer than 2.80" require a long case trimmer base.