Questions? Feedback? powered by Olark live chat software

Refer a friend

Know a friend, relative, or co-worker who may be interested in this product? Take this opportunity to let them know.
Friend's Email
Your Email
Your Name
The Message.
Hi, You're receiving this email because {name} thinks the RCBS Hand Case Neck Turning Tool Kit #90401 would interest you.

RCBS Hand Case Neck Turning Tool Kit #90401

The RCBS Hand Case Neck Turner is designed to peel brass from the outside of a case neck to a constant thickness, which is necessary because most commercially available brass has different thicknesses in the neck. This causes concerns with case neck concentricity and bullet run-out. Hand-loaded ammo that has been trued up produces more consistent and accurate results. The case neck is guided by caliber-specific pilot/mandrels (available separately) in the cutter part. The cutter design allows you to zero the cutter to the pilot/mandrel and then dial in the appropriate case neck thickness in.0005-inch increments using the micrometer adjustment. The cutter may be used with either your right or left hand.

  • Cutter design can zero the cutter to the pilot/mandrel and then use the micrometer adjustment to dial the desired case neck thickness in .0005-inch increments
  • Right- or left-handed us
  • Designed for durability and long life
  • Precision crafted
For more information, please click Here Regards,
Bracketed text e.g {name} indicates details that will be completed by the system when you click the submit button.

In order to assist us in reducing spam, please type the characters you see: