Questions? Feedback? powered by Olark live chat software

This product has been disabled.

This product is no longer active. Perhaps you should search our shop for other similar products.

Specifications

brand: reflex
gunparts: supressor

Description

Reflex T16 Overbarrel Supressor 45Cal

➼ Rifle picture not include
➼ Threaded 17x 1mm
➼ Adds 95mm to the length of your rifle.
➼ The practical sound moderator for full-bore rifles...


To be effective, full-bore rifle suppressors have to be rather bulky. Adding a suppressor to a full-bore rifle normally increases the overall length by about twelve inches, making the weapon awkward and muzzle-heavy. The suppressed weapon doesn't fit in a standard rifle case, so the sound moderator must be removed for storage and transport. Shortening the barrel by a few inches helps a bit, but if the barrel is shortened too much, the bullet muzzle velocity and trajectory are adversely affected. To overcome these and other problems, Finnish designer Juha Hartikka invented the Reflex Suppressor...

What is a Reflex Suppressor?

The patented Reflex design of suppressor (or sound moderator) has the expansion chamber sleeved back over the front four to eight inches of the barrel. This reduces the overall length of the suppressed weapon, and improves its balance and handling qualities.

Why use a full-bore rifle suppressor?

To save your hearing and, if you use a rifle for work, to comply with the UK Health and Safety legislation. Independent tests with a 308 Winchester hunting rifle confirm that Reflex Suppressors do reduce the sound pressure at the shooter's ear to well below the British Health and Safety Executive's "peak action level" of 140 dB. Above this level, HSE regulations require employers to reduce workers' exposure as far as reasonably practicable by means other than ear protectors. This legal requirement also extends to self-employed persons.

In practice, depending on the amount of bullet flight noise reflected back to the shooter by trees or fences etc., a full-bore hunting rifle with a good suppressor sounds about the same as a high velocity 22 LR rim-fire rifle.

Is a suppressed full-bore rifle "reasonably practicable"?

Individual hunting and target-shooting circumstances vary, but the Reflex Suppressor concept solves most of the practical problems associated with suppressed full-bore rifles. For instance. this Tikka M695 270 Win hunting rifle with full-length barrel and Reflex Suppressor still fits neatly into a standard rifle case:

For muzzle-mounted suppressors, the usual single-point mounting system  is relatively crude and weak - just a short 1/2" UNF thread and a small shoulder to align the sound moderator with the rifle bore.

By contrast, the two-point Reflex mounting system with a thread at the muzzle and a close fitting bush at the rear of the suppressor is very strong and resistant to harsh field use. The suppressor stays in alignment with the bore even if it is accidentally unscrewed a couple of turns.

Accuracy and trajectory are not impaired!

We usually find that the accuracy of hunting and target rifles is, if anything, slightly improved by the addition of a Reflex Suppressor.

This 1/8 MOA group was fired during load testing with a specialized long range target/varmint rifle fitted with a T8 Scout Reflex Suppressor

Shooting without ear defenders, we can listen as well as look and feel for wind changes. The suppressor also cuts recoil by about one-third, which makes group-shooting a real pleasure.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like